Veolia Australia and New Zealand

 Box Assembly Instructions

Assembling a box is similar to assembling an archive box.

 

Step 1

Take the flatpack box and open it as shown. Fold flap (1) inward, into the box until it touches the inside of the box.

 

Step 2

Fold the side flaps labelled (2) inward so that they overlap onto the centre flap (3).

 

Step 3

Ensure that flap (1) is pushed up against the inside of the box. Fold flap (3) down, into the box. Make sure flaps (2) are folded in before you push flap (3) down.

Step 4

Rotate the box so that flap (3) sits on the bottom.

 

 

 

Step 5

Keeping flap (1) against the side of the box, reach into the box and pull up both flaps (2) so that they are flush against the inside of the box.

 

 

Step 6

With flaps (2) in place at each side. Push flap (1) down so that it sits at the bottom of the box. You may choose to secure flaps (2) upright with tape. Attach/fold in the lid and your box is done!

 


Lid Assembly Instructions (LARGE BOXES only)

Step 1

Take the flatpack box and open it as shown. Fold flap (1) inward, into the box until it touches the inside of the box.

Step 2

Fold the side flaps labelled (2) inward so that they overlap onto the centre flap (3).

 

Step 3

Ensure that flap (1) is pushed up against the inside of the box. Fold flap (3) down, into the box. Make sure flaps (2) are folded in before you push flap (3) down.

Step 4

Rotate the box so that flap (3) sits on the bottom.

 

 

Step 5

Keeping flap (1) against the side of the box, reach into the box and pull up both flaps (2) so that they are flush against the inside of the box.

 

Step 6

Complete steps 2 - 6 on the other end of the box to complete the lid.

 

 

Download a copy below  

PDF
RECYCLEPAK Assembly & Shipping Instructions (708.33 KB)